|
#1
|
||||
|
||||
nice Sean!
pretty aggressive rocker too!
__________________
__________________ ___________________________________ You don't direct ostriches, you herd them |
#2
|
|||
|
|||
Thanks BigR.
Super Aggressive rocker, but with the outline and oliptical concave its screams upwind.....(or its predicessor did) hhoping it will be similar but better. u riding tommarrow? |
#3
|
||||
|
||||
Nice boards!!! What was the construction? Balsa core? Carbon fiber?
Perhaps Rick can create a new forum for board/kite construction. I just finished my fifth board (122 x 46) and tested it yesterday. Balsa core with fiberglass/epoxy. It was not that good in the chop as it has very little rocker. But at least it did not break with some fairly hard landings. As it held up I may ask a friend to add the graphics since I'm not that artistic.
__________________
CEO & Airman of the Board |
#4
|
|||
|
|||
Thats A nice Board Too. Mine is Constructed of Divincell H80 Foam And Fiber Glass. I have found that With a good outline and Bottom Shape you can achieve really good upwind ability(with alot of Rocker) and The board eats thru chop. My board has almost 2" of rocker. But goes upwind Like a champ.
|
#5
|
||||
|
||||
Kite,
Did you do the graphics? Nice! |
#6
|
|||
|
|||
The graphics were designed by Me and my friend Danny, in Illustrator and then 3m vehicle wrapped and clear coated.
|
#7
|
||||
|
||||
How well does the 3M wrap with clear coat hold up? I thought about trying that on the bottom, but was not sure if it would last.
__________________
CEO & Airman of the Board |
|
|