|
#1
|
||||
|
||||
My buddy has a Cab bar for sale. It has everything but the lines. I think he only wants like 30 bucks for it. Let me get a picture of the bar and see if it is the same as yours.
__________________
"Stop living for someone else, and start living your own life! It's amazing how things work out perfect." RS |
#2
|
||||
|
||||
hey i just fixed my corroded middle metal ring. if you had the same problem as me...all you have to do is unscrew the old screws, knock the old metal insert (the one still in your bar) out and get the screws out with some pliers. then go to your local ace hardware (lowes and HD dont have the exact screws you need, you want stainless btw) and get the 2 new screws and put your bar back together. i fixed mine 2 weeks ago for 39 cents. good luck- Ross
__________________
"now watch me jump that house..." _______________________ Ross Bond down town St. pete 12m flexifoil Ion (Rasta) 16m switchblade 2 (blue) a fresh new freak dog board |
#3
|
|||
|
|||
The screws corroded inside the bar on mine. I ended up just using a two part epoxy to put the piece back on.
|
#4
|
||||
|
||||
Awesome ....
Here are the pictures. i was thinking of fixing with Epoxy but I rather do a clean fix if possible. If someone has the spare bar or part (the metal ring for the chickenloop) I would rather get that .... let me know ... and THANKS!!!!
__________________
Felipe Last edited by highroller; 05-14-2009 at 08:50 PM. |
#5
|
||||
|
||||
Ross the problem that I have is that one screw corroded inside and the head broke so I can't get it out .... that is why I am looking for a replacement
__________________
Felipe |
#6
|
|||
|
|||
sorry, the bars i have are the older versions.
|
#7
|
||||
|
||||
anyone else have a space bar ... let me know ... thanks!!!
__________________
Felipe |
#8
|
||||
|
||||
Quote:
Can't you drill out the corroded screw and then replace with a new stainless steel screw? I've seen this done on 121 bars before! Hope that helps! I am about to do the same.
__________________
"I LOVE the smell of WIND in the morning... Smells like..... KITING!!" "The biggest drawback of kiteboarding is the adverse effects it has on getting anything else done." |
#9
|
||||
|
||||
That is what I am about to try before I go down the epoxy route. The problem I see is that I can only access the screw from the top so I am not sure how I am going to "drill out" the scew without damaging the thread.
What are you thinking of doing to get around this???
__________________
Felipe |
|
|