View Single Post
  #14  
Old 05-12-2010, 04:22 PM
ricki's Avatar
ricki ricki is offline
Administrator
Site Admin
 
Join Date: Jul 2004
Location: Florida
Posts: 8,700
Default



"ROBERT, La. -- Oil and gas stream from the riser of the Deepwater Horizon well May 11, 2010. This video is from the larger of two existing leaks on the riser. This leak is located approximately 460 feet from the top of the blowout preventer and rests on the sea floor at a depth of about 5,000 feet."
http://www.deepwaterhorizonresponse....c/2931/548775/




"Venice, Louisiana (CNN) -- The "top hat" oil containment device has reached the sea floor in the Gulf of Mexico and should be in position over a leaking well head and operational by the end of the week, BP said Wednesday.
A larger containment vessel was unsuccessful in stopping the flow of oil from the gusher about 5,000 feet underwater. The spill is sending 210,000 gallons of crude into the Gulf of Mexico each day.
The "top hat," a 5-foot-tall, 4-foot-diameter structure, weighs less than 2 tons. The structure was deployed by the drill ship Enterprise.
BP built the smaller dome after a much larger, four-story containment vessel designed to cap the larger of two leaks in the well developed glitches Saturday. Ice-like hydrate crystals formed when gas combined with water and blocked the top of the dome, making it buoyant.
The new device would keep most of the water out at the beginning of the capping process and would allow engineers to pump in methanol to keep the hydrates from forming, said Doug Suttles, BP's chief operating officer for exploration and production. Methanol is a simple alcohol that can be used as an antifreeze."

Continued at:
http://www.cnn.com/2010/US/05/12/oil...ex.html?hpt=T1


Just because the surface slick, may eventually be out of sight, somewhat, there is still ill it will be causing. This New York Times article explores this in brief:



http://mediacompost.wordpress.com/20...ts-underwater/

.
__________________
FKA, Inc.

transcribed by:
Rick Iossi

Last edited by ricki; 05-14-2010 at 08:47 AM.
Reply With Quote