|
Check valve Ball
Does any one know where I can find these white balls that is in the inflate valve? I have lost a few of these while trying to inflate. This happen offen when the valve is wet. Thanks for your help....
|
The easiest thing to do is just quickly put your finger over the hole after you pull the pump hose out, and then quickly plug it. Takes a little timing, but it works.
How did the ball get lost? Did it fall inside the bladder? (I've seen that happen - but I've never seen the ball come out of the bladder) |
Same thing happened to me. the ball went inside, and i can't get it back into the valve. I contacted best and they don't sell them, you would have to get a new bladder. try what robertovillate recommended or try to pinch the bottom of the valve really hard, then quickly pull the hose out and plug the valve.
|
Ball
Actually, the check valve ball shot out of my inflate nozzle ( maybe because I was trying to inflate it too fast). Or maybe it was from over inflation which cause the valve diameter to increase from the pressure. Hope that other out there have had the same problem and learned from it.
|
| All times are GMT -5. The time now is 09:30 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Do not advertise outside of [COM] Forums.
Do not show disrespect for others in your postings.
Users can be denied access to this Site without warning.
FKA, Inc., it’s officers and moderators are not responsible
for the content of the postings and any links or pictures posted.
Report Problems by PM to “administrator” or via email to flkitesurfer@hotmail.com
Copyright FKA, Inc. 2004, All Rights Reserved.