need new lines !

[kiter73]

I need someone help !I need to replace my lines on my "07 waroo bar .Any idea should help ,where should i buy or if i'll buy some by lenght ho to make the ends .Thank for any help!

[ricki]

Sorry for the slow response. Two options come to mind. One is to buy a new set of lines from a retailer. I do not recommend buying raw spectra, sleaving material and then worming the line through the sleaving and sewing it in place. Did it years back, it was a pain in the butt. This is already done with the lines you buy with loops in place. You can't tie knots in spectra without reducing the line strength at the knots very substantially (read=it will break at the knot way too easily).

The other option would be to buy Q line, cut it to length, stretch each section has hard as you can for a while, then tie figure eight knots in each end and you're good to go. You can buy a bulk roll of 500 ft. of Q line for around $110. USD. Unlike spectra you can tie knots in it without loss of strength.